Electronic Weighbridge

Electronic Weighbridge 1 10~20mm thickness steel plate 2 6mm thickness of U-beam 3 Lifelong service 4 5-year guarantee

Electronic Weighbridge 

Main features of weighing platform

The structure is enclosed construction with 6 U-shaped beams. Compared with normal structure with I-shaped beams, this enclosed design has two advantages--one is to keep off corrosion from inside out protect platform; the other one is more rigid since 6 U-shape beams has 12 support lines than 6 I-shaped beams' and besides stress from truck etc can be divided equally. And surface of platform is covered with epoxy zinc rich primer and acrylic marine paint--the former, is for the first surface layer, whose main function is corrosion protection and to reducing chalking; while, the second layer is acrylic marine paint which is anti-acid, anti-alkali and anti-scratch.

Main features of indicator

Wide range of signal input from -60mv to +60mv, 700000 A/D inner counts and more than 50 Hz in A/D conversion speed

Complete panel calibration and parameters setup

Multi-point non-linear modification and compensated calibration performance

Automatically identify whether the connecting wire of the load cell is correct

To be coupled with variety of pin type printers

Capable of printing all kinds of weighing records

Capable of printing out daily report, series of statistical forms, total table as well as parameters for the weighing indicator and related ones for calibration code

Complete saving, checking and deleting system for the data records, together with power-failure date protection

Accurate clock, calendar and automatic leap year and month setting, all of which are not affected by power failure

Capable of setting the range of zero track

Capable of setting the range of zero setup and starting automatic zero setup

Taring, presetting and selecting tare according to truck number

Overall self-identification and lots of trouble-shooting information

Serial communication interface

Scoreboard interface (allow to be connected to scoreboards)

Standard parts

          Load cell: 8 or 10 sets

          Indicator: 1 set

          Cable:   30m

Selective parts

          Computer: 1 set

          Printer:   1 set

          Ramp:    1 or 2 sets

          Guardrail: 2 sets